1K-PUR preparat za popravak vjetrobrana, sa visokim nekonduktivnim svojstvima. Namijenjen za korištenje na novoj generaciji vozila. Sprječava kontakt koroziju na aluminijskim šasijama. Djeluje u hladnom stanju. TÜV-testiran (Njemačka). Dokazana OEM kvaliteta. Brzo snažno lijepljenje. Namijenjen je za korištenje sa novim sustavom prajmera. Može se koristiti nakon 1,5 sata ako automobil nema ili ima jedan zračni jastuk. U slučaju dva zračna jastuka, treba se čekati 2 sata.
Ovaj se preparat koristi za nepos redno glaziranje automobila u slučajevima kada proizvođač automobila nalaže korištenje nekonduktivnog glazurnog ljepila, ili ljepila nove generacije, kao na primjer u slučajevima kada je antena integrirana u staklo ili vjetrobran.
Kat br : 6141
Primena : 1. Cleaning agent
The surfaces to be bonded have to be dry and free of oil, dust, grease and other dirt residues. The glass surface or the ceramic coating has to be cleaned with Liquiclean or cleaning and diluting agent, Item No. 6130, and then with the glass-cleaning foam Item No. 1512. Also the car body flange or the newly painted car body parts are to be cleaned that way. We recommend cleaning the cut back residual adhesive bead with Liquiclean or cleaning and diluting agent as well. Before the sealant is applied, or before the glass surface is bonded, the cleaned holding surface has to have dried completely.
2. Priming / activation of pre-coated glass panes
Active Primer is necessary for the priming of the holding surface, when glass panes are to be bonded. The Active Primer is included in the delivery of the glass pane repair set as 10 ml stick. Prior to use, shake Active Primer well for at leas 45 sec. Within the bond area, Active Primer can universally be applied on the cleaned glass surface or the ceramics silk screen, on the clean painted surface of newly painted parts of the car body, on the cut back residual adhesive beads, as well as on pre-coated glass panes (PUR and RIM coating). Apply Active Primer sparsely and uniformly (wet film has to have a thickness of approx. 0.05 mm). The primed surface has to dry for approx. 15 minutes before the glass adhesive is applied.
If the residual adhesive bead has been cut back more than 6 hours ago, a pre-treatment with Active Primer is mandatory.
Pakovanje : 1 kom
Tu smo za sva vasa pitanja: Telefonom :+381 35 312-193 Ili u kontakt formi
